View MWDM1L-GP-0E_4695005.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Micro-D Harness
Micro-D Metal shell MWDM Back-to-Back unshielded Cable Assemblies
Save Time and Money With Back-To-Back Cables- These Micro-D connectors feature crimp wire terminations and epoxy encapsulation. The installed cost is lower than terminating solder cup connectors. 100% Certified- all back-to-back assemblies are 100% checked for continuity, resistance, voltage and insulation resistance. Hardware Note- if jackposts are required on one end and jackscrews on the other, use hardware designator "B" (no hardware installed), and order hardware kits separately.
A B
HoW to oRDER BACk-to-BACk uNsHIELDED CABLEs
shell Material Insulator Contact and Finish Material Layout 9 15 21 25 31 37 51 51-2 67 69 100 Connect or type GP - Pin (Plug) Wire Gage (AWG) 4 6 8 0
- - - -
#24 #26 #28 #30
series
Wire type k - M22759/11
Wire Color 1 - White 2 - Yellow 7 - Ten Color
total Length Inches Hardware 18
Total Length In Inches. "18" Specifies 18 Inches (2" Min.)
MWDM Aluminum shell L - LCP 1 - Cadmium 30% GlassFilled Liquid 2 - Nickel Crystal 4 - Black Anodize Polymer 5 - Gold 6 - Chem Film
stainless steel shell
Connector Both Ends
600 Vrms Teflon (TFE)
Gs - Socket
Cs
(Receptacle) Connector Both Ends - Pin Connector to Socket Connector
J - M22759/33
Repeating Stripes Per MIL-STD-681
600 Vrms Modified CrossLinked Tefzel(R) (ETFE) 600 VrmsType E M16878/4 (TFE) (replaced by M22759/11 for mil spec applications)
5 - Color-Coded
E - NEMA HP3-EB
3
-
Passivated
(Striped wire not available on 67, 69 or 100 pin connectors or for #28, #30 AWG)
B P M M1 s s1 L k
Sample Part Number
MWDM 1 L- 25 GP - 6 k 7- 18 B
MICRo-D MouNtING HARDWARE
B P M M1 s s1 L k
Order Hardware Separately
thru-Hole
Removable Includes Nut and Washer
Jackpost
Jackscrew
Hex Head Removable E-ring
Jackscrew
Hex Head Removable E-ring Extended
Jackscrew
Slot Head Removable E-ring
Jackscrew
Slot Head Removable E-ring Extended
Hex Head Non- Removable
Jackscrew
Jackscrew
Slot Head NonRemovable Extended
(c) 2006 Glenair, Inc. Rev. 8-06 www.glenair.com
CAGE Code 06324/0CA77
Printed in U.S.A. E-Mail: sales@glenair.com
GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912
B-6
Micro-D Metal Shell MWDM Back-To-Back Unshielded Cable Assemblies
PERFORMANCE SPECIFICATIONS
Current Rating DWV Insulation Resistance Contact Resistance Low Level Contact Resist. Magnetic Permeability Operating Temperature Shock, Vibration Mating Force 3 AMP 600 VAC Sea level 5000 Megohms Minimum 8 Milliohms Maximum 32 Milliohms Maximum 2 Maximum -55 C. to +150 C. 50 g., 20g. (10 Ounces) X (# of Contacts) Connector Shell
MATERIALS AND FINISHES
Aluminum Alloy 6061 or Stainless Steel, 300 Series, passivated. See Ordering Info for Plating Options Liquid Crystal Polymer (LCP) Flourosilicone Rubber, Blue Beryllium Copper Gold over Nickel Plating Copper Alloy Gold Over Nickel Plating 300 Series Stainless Steel Epoxy Resin Hysol EE4215
Insulator Interfacial Seal Pin Contact Socket Contact Hardware Encapsulant
B
A B C E D 9-69 CONTACTS .096/.088 (2.43/2.23) DIA. 100 CONTACTS .150/.145 (3.81/3.68) DIA. G
F
WIRE LENGTH +1.0/-0.0 (+25.4/-0.0) .093 .005 (2.36 0.13) H J
DIMENSIONS
A Max. In . Layout 9P 9S 15P 15S 21P 21S 25P 25S 31P 31S 37P 37S 51P 51S 51-2P 51-2S 67P 67S 69P 69S 100P 100S In.
.785 .785 .935 .935 1.085 1.085 1.185 1.185 1.335 1.335 1.485 1.485 1.435 1.435 1.835 1.835 2.235 2.235 1.735 1.735 2.170 2.170
B mm.
0.08 14.35 14.35 18.16 18.16 21.97 21.97 24.51 24.51 28.32 28.32 32.13 32.13 30.86 30.86 41.02 41.02 51.18 51.18 38.48 38.48 45.72 45.72 .003 .565 .565 .715 .715 .865 .865 .965 .965 1.115 1.115 1.265 1.265 1.215 1.215 1.615 1.615 2.015 2.015 1.515 1.515 1.800 1.800
C Max. In.
.333 .400 .483 .551 .633 .701 .733 .801 .883 .951 1.033 1.101 .983 1.051 1.384 1.450 1.784 1.850 1.284 1.350 1.383 1.451
D Max. In.
.184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .184 .250 .224 .293 .184 .250 .184 .250 .224 .293 .270 .333
E Max. In. In.
.308 .308 .308 .308 .308 .308 .308 .308 .308 .308 .308 .308 .351 .351 .310 .310 .310 .310 .351 .351 .394 .394
F mm.
0.08 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 4.65 4.95 .003 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195 .183 .195
G Max. In.
.416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429 .416 .429
H Max. In.
.400 .400 .550 .550 .700 .700 .800 .800 .950 .950 1.100 1.100 1.050 1.050 1.450 1.450 1.850 1.850 1.350 1.350 1.442 1.442
J Max. In.
.270 .270 .270 .270 .270 .270 .270 .270 .270 .270 .270 .270 .310 .310 .270 .270 .270 .270 .310 .310 .360 .360
mm.
19.94 19.94 23.75 23.75 27.56 27.56 30.01 30.01 33.91 33.91 37.72 37.72 36.45 36.45 46.61 46.61 56.77 56.77 44.07 44.07 55.12 55.12
mm.
8.46 10.16 12.27 14.00 16.08 17.81 18.62 20.35 22.43 24.16 26.24 27.96 24.97 26.70 35.15 36.83 45.31 46.99 32.61 34.29 35.13 36.86
mm.
4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 4.67 6.35 5.69 7.44 4.67 6.35 4.67 6.35 5.69 7.44 6.86 8.46
mm.
7.82 7.82 7.82 7.82 7.82 7.82 7.82 7.82 7.82 7.82 7.82 7.82 8.92 8.92 7.87 7.87 7.87 7.87 8.92 8.92 10.01 10.01
mm.
10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90 10.57 10.90
mm.
10.16 10.16 13.97 13.97 17.78 17.78 20.32 20.32 24.13 24.13 27.94 27.94 26.67 26.67 36.83 36.83 36.83 36.83 34.29 34.29 36.63 36.63
mm.
6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 6.86 7.87 7.87 6.86 6.86 6.86 6.86 7.87 7.87 9.14 9.14
(c) 2006 Glenair, Inc.
CAGE Code 06324/0CA77
Printed in U.S.A.
GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912
www.glenair.com
B-7
E-Mail: sales@glenair.com

▲Up To Search▲

Price & Availability of MWDM1L-GP-0E

	To Download MWDM1L-GP-0E Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .